Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25
  1. #16
    Bumping up to keep current offer threads in proper order!
    For more catchy deals and offers from PowerGamers, Please visit us @ http://forums.vr-zone.com/powergamers

    PowerGamers FB Launched! For exclusive deals, "Like" us @ http://www.facebook.com/PowerGamers

  2. #17
    Latest Firmware Version 3.55 available.

    http://tuact.com/software/Fragnstein...rade_V3.55.exe

    This allows users to swap left stick and mouse movement for games that need this configuration to play properly. One such game would be Dead Nation.

    Cheers!
    PowerGamers
    For more catchy deals and offers from PowerGamers, Please visit us @ http://forums.vr-zone.com/powergamers

    PowerGamers FB Launched! For exclusive deals, "Like" us @ http://www.facebook.com/PowerGamers

  3. #18
    Bumping up to keep current offer threads in proper order!
    For more catchy deals and offers from PowerGamers, Please visit us @ http://forums.vr-zone.com/powergamers

    PowerGamers FB Launched! For exclusive deals, "Like" us @ http://www.facebook.com/PowerGamers

  4. #19
    All stocks of FRAGnstein sold. Warranty and support would continue for stock sold thru our resellers.

    With effect from Jan 2012, we would supersede with he new enhanced Aimon PS Elite version.

    Please take note that PowerGamers DID NOT imported earlier TUACT Aimon PS series. These are parallel imported by various game distributors and stores. We are not liable to assist or support Aimon PS sold thru these outlets.



    Best Regards
    PowerGamers
    For more catchy deals and offers from PowerGamers, Please visit us @ http://forums.vr-zone.com/powergamers

    PowerGamers FB Launched! For exclusive deals, "Like" us @ http://www.facebook.com/PowerGamers

  5. #20

    Unhappy

    Good Morning

    I'm a nonworking FRAGnStein mouse owner. I've followed the instructions here to update my mouse for the PS3 and the update went as posted.

    Because of Windows 7's problem updating the mouse... this video was very helpful: FRAGnStein Proper Driver Installation - YouTube

    Now the problem. FRAGnStein mouse was updated and completed. The update had no problems. We chose the Battlefield 3 settings for the mouse.

    Now... the FRAGnStein mouse performs worse than it did before the update to 3.55. I was very disappointed and the mouse is still useless. Before the 3.55 update... the mouse was somewhat choppy in movement that I couldn't use it. Now with 3.55, it's many times worse in choppy movement!! Stair caseing is very bad. It's like using a $3 mouse that's broken.

    With update 3.55... and applying the BF3 settings for the BF3 game... now when moving the mouse horizontally left and right, the mouse skips and jumps as if the resolution is set very low. It's so choppy in it's movement it makes you dizzy watching it. Movement up and down is somewhat better, but not much. I tried adjusting all the in game movement settings and the mouse stays choppy from fast to very slow movement settings. Adjusting the sensitivity setting on the mouse itself does nothing but slow the mouse down. Still choppy.

    All mouse buttons function correctly and does the left hand chuck. Mouse movement is the main problem and it's useless to play the game.

    Is there an answer to this problem to get the mouse to function correctly? The 3.55 update went smoothly... and the mouse still doesn't work for gaming.

    I'd hate to throw it away since it cost me $125.00 US and Banco went out of business shortly after receiving the FRAGnStein.

    It's interesting... I also have an old Splitfish FragFX V2 / SE mouse and it's seems to work well enough to use for Battlefield 3... but it's a very cheap product and that's why I bought the FRAGnStein.

    I was considering buying the Aimon PS Elite from Tuact, but the user reviews and user videos on YouTube are not good. Users are saying the Aimon PS Elite doesn't perform well... users have received broken Elites when shipped and that Tuact's customer support is not very helpful.

    Please help me with my FRAGnStein, if anyone stills read this forum thread. I'll keep checking back.

    Thank you

  6. #21
    Quote Originally Posted by redknightsoh5 View Post
    Good Morning

    I'm a nonworking FRAGnStein mouse owner. I've followed the instructions here to update my mouse for the PS3 and the update went as posted.

    Because of Windows 7's problem updating the mouse... this video was very helpful: FRAGnStein Proper Driver Installation - YouTube

    Now the problem. FRAGnStein mouse was updated and completed. The update had no problems. We chose the Battlefield 3 settings for the mouse.

    Now... the FRAGnStein mouse performs worse than it did before the update to 3.55. I was very disappointed and the mouse is still useless. Before the 3.55 update... the mouse was somewhat choppy in movement that I couldn't use it. Now with 3.55, it's many times worse in choppy movement!! Stair caseing is very bad. It's like using a $3 mouse that's broken.

    With update 3.55... and applying the BF3 settings for the BF3 game... now when moving the mouse horizontally left and right, the mouse skips and jumps as if the resolution is set very low. It's so choppy in it's movement it makes you dizzy watching it. Movement up and down is somewhat better, but not much. I tried adjusting all the in game movement settings and the mouse stays choppy from fast to very slow movement settings. Adjusting the sensitivity setting on the mouse itself does nothing but slow the mouse down. Still choppy.

    All mouse buttons function correctly and does the left hand chuck. Mouse movement is the main problem and it's useless to play the game.

    Is there an answer to this problem to get the mouse to function correctly? The 3.55 update went smoothly... and the mouse still doesn't work for gaming.

    I'd hate to throw it away since it cost me $125.00 US and Banco went out of business shortly after receiving the FRAGnStein.

    It's interesting... I also have an old Splitfish FragFX V2 / SE mouse and it's seems to work well enough to use for Battlefield 3... but it's a very cheap product and that's why I bought the FRAGnStein.

    I was considering buying the Aimon PS Elite from Tuact, but the user reviews and user videos on YouTube are not good. Users are saying the Aimon PS Elite doesn't perform well... users have received broken Elites when shipped and that Tuact's customer support is not very helpful.

    Please help me with my FRAGnStein, if anyone stills read this forum thread. I'll keep checking back.

    Thank you
    Howdy,

    Thanks for the writeup.

    Sorry to hear that the FRAGnStein is not running smoother for you on BF3. Is your current jittering on BF3 only? Have u tried on MW3 or BC2? As far as the info is available out currently, PS3 BF3 is a bit sluggish on the control. But the performance should be close to BC2 feel. What is your current settings? High jittering is a clear indication of in-game and F stop calibrations.

    May I direct you to TUACT tech support? As they are based in USA and could be more useful to you on the support? We are Singapore based distributor, and we mainly take care on the local community after-sales support.

    If needed I would point u straight to the management of TUACT to get their support. They are still BANNCO. The new 3rd Gen Aimon PS Elite is definitely way better as they used new gen Avago 1600 CPI sensor, rebuilt the firmware and the calibration tuning. Being a 3rd Gen product, it is definitely better in game handling (esp in scoped mode usage).

    Hope this helps.

    Best Regards
    PowerGamers
    For more catchy deals and offers from PowerGamers, Please visit us @ http://forums.vr-zone.com/powergamers

    PowerGamers FB Launched! For exclusive deals, "Like" us @ http://www.facebook.com/PowerGamers

  7. #22
    Thank you for the reply!!

    I will test my old FRAGnStein (3.55) (with the BF3 settings) with all my PS3 games, and post the results. Great Idea.

    Yes... I would like the USA contact info please.

    I was getting ready to reset the FRAGnStein back to the General Settings and give that a try also.

    I loved the FRAGnStein when it worked correctly. For the old Socom Confrontation and games of that time... the FRAGnStein was far superior to the Splitfish mouse.

    If all else fails... I will go on your advise and buy the "new 3rd Gen Aimon PS Elite". I trust your judgement.

    I really dislike(hate) Sony's hand controller. It's a kid;s toy controller and to small for an adult's hands and should have been redesigned with the PS3.

    I also use the Sony MOVE controller. The MOVE is an excellent controller for games like Socom4 and Killzone3. But Sony didn't enough mussel to push DICE to put MOVE controls into BF3. MW3 lost my money with no MOVE support.

    Mouse control like the FRAGnStein... and the MOVE support are the only games that get my money now.

    Thank you!

  8. #23
    Quote Originally Posted by redknightsoh5 View Post
    Thank you for the reply!!

    I will test my old FRAGnStein (3.55) (with the BF3 settings) with all my PS3 games, and post the results. Great Idea.

    Yes... I would like the USA contact info please.

    I was getting ready to reset the FRAGnStein back to the General Settings and give that a try also.

    I loved the FRAGnStein when it worked correctly. For the old Socom Confrontation and games of that time... the FRAGnStein was far superior to the Splitfish mouse.

    If all else fails... I will go on your advise and buy the "new 3rd Gen Aimon PS Elite". I trust your judgement.

    I really dislike(hate) Sony's hand controller. It's a kid;s toy controller and to small for an adult's hands and should have been redesigned with the PS3.

    I also use the Sony MOVE controller. The MOVE is an excellent controller for games like Socom4 and Killzone3. But Sony didn't enough mussel to push DICE to put MOVE controls into BF3. MW3 lost my money with no MOVE support.

    Mouse control like the FRAGnStein... and the MOVE support are the only games that get my money now.

    Thank you!
    No worries, post your results soon on other games. I believe you would see the FRAGnStein latest firmware (3.55) highly playable on COD BO, MW2, MW3. BC2 you would slightly need to fine tune on scoped mode, otherwise run and gun would be fine too.

    If possible, pm me your email addy and I would forward that to TUACT management.

    For more catchy deals and offers from PowerGamers, Please visit us @ http://forums.vr-zone.com/powergamers

    PowerGamers FB Launched! For exclusive deals, "Like" us @ http://www.facebook.com/PowerGamers

  9. #24
    As of today... I've tested the old FRAGnStein with 3.55 on all the PS3 games I have... and it performs so poorly it's not usable anymore.

    I'm out of ideas and getting tired of trying to revive this mouse for PS3. The FRAGnStein may be a dead issue now.

    I may be stuck with the substandard PS3 hand controller.

    My old Splitfish FragFX V2 mouse seems to work and is usable for all the PS3 games I have. It's a pretty cheat replacement for the FRAGnStein... but at least it still works.

    I'd be willing to try the Aimon PS Elite mouse, if it were available in the U.S. at Gamestop or Best Buy. I must have a way to return the Aimon PS Elite if it can't perform as advertised. I'm hesitant about the Elite due to the user reviews on YouTube. They're not good at all.

    If the Aimon PS Elite becomes available in the U.S., I will give it a try.

    Thanks for all your help!!

    jim

  10. #25
    Quote Originally Posted by redknightsoh5 View Post
    As of today... I've tested the old FRAGnStein with 3.55 on all the PS3 games I have... and it performs so poorly it's not usable anymore.

    I'm out of ideas and getting tired of trying to revive this mouse for PS3. The FRAGnStein may be a dead issue now.

    I may be stuck with the substandard PS3 hand controller.

    My old Splitfish FragFX V2 mouse seems to work and is usable for all the PS3 games I have. It's a pretty cheat replacement for the FRAGnStein... but at least it still works.

    I'd be willing to try the Aimon PS Elite mouse, if it were available in the U.S. at Gamestop or Best Buy. I must have a way to return the Aimon PS Elite if it can't perform as advertised. I'm hesitant about the Elite due to the user reviews on YouTube. They're not good at all.

    If the Aimon PS Elite becomes available in the U.S., I will give it a try.

    Thanks for all your help!!

    jim
    Hi Jim,

    I am sorry that u faced issue with your FRAGnStein. You may want to provide me with the setting config you used on your FRAGnStein and the in-game settings you set for the games you attempted. There are a number of variables that could be better defined.

    You may need to check with TUACT sales on the USA outlets that you can purchase the New TUACT AIMON PS Elite that provide returns.

    We haven't had any complaints from ex-FRAGSnetin users whom upgraded to AIMON PS Elite yet here.

    Again, do consider to provide us your email and we would assist to direct u to TUACT directly. Thanks.

    Best Regards
    PowerGamers
    For more catchy deals and offers from PowerGamers, Please visit us @ http://forums.vr-zone.com/powergamers

    PowerGamers FB Launched! For exclusive deals, "Like" us @ http://www.facebook.com/PowerGamers

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Epson's Latest Ethernet-read Stylus Office TX-510FN
    By eventer in forum News around the web!
    Replies: 0
    Last Post: Jan 29th, 10, 12:55 PM
  2. FRAGnStein Monster Controllers Direct Gamers Support
    By PowerGamers in forum PC/Console Games Garage
    Replies: 9
    Last Post: Nov 8th, 09, 09:15 AM
  3. Nvidia tech-support ?
    By sheewai in forum Hardware Depot
    Replies: 11
    Last Post: Dec 19th, 06, 08:00 PM
  4. Tech Support...
    By hencpu in forum Chit Chatting
    Replies: 17
    Last Post: Jun 1st, 06, 09:32 PM
  5. Google latest PayPal Killer...Read on
    By medallion in forum Chit Chatting
    Replies: 8
    Last Post: Feb 18th, 06, 12:00 AM